Light Sensors, Sensors, Breakout Boards, Shields & Modules
Laser Diode Red Point Line Cross Laser Diode 650nm 5mW
Availability:
Out of stock
Product details of Laser Diode Red Point Line Cross Laser Diode 650nm 5mW Module Head Glass Lens Adjustable Laser Pointer
- Best For Arduino Projects
- It could be used for sight positioning
- It could be used for laser testing tools
- It could be used for concentricity positioning
- It could be used to make signal equipment
₨200.00
Out of stock
Laser Diode Red Point Line Cross Laser Diode 650nm 5mW Module Head Glass Lens Adjustable Laser Pointer
Product Information(Point):
- Red dot pointlaser tube, laser module
- Wavelength: 650nm
- Diameter: 12MM
- Weight: 13.5g
- Long: 35MM
- Max Power: 5MW
- Voltage: DC3V-6V
- Max Current: 40MA
- Drive circuit: APC
- Product Information(Line):
- Red (adjustable Line) laser tube, laser module
- Wavelength: 650nm
- Diameter: 12MM
- Weight: 13.5g
- Long: 36MM
- Power: 5MW
- Voltage: 3V-6V
- Current: 30-50MA
- Product Information(Cross):
- Red cross line laser tube, laser module
- Diameter: 12MM
- Weight: 13.5g
- Long: 36MM
- Power: 5MW
- Voltage: DC3V-6V
- Current: 25-50MA
| Weight | 0.1 kg |
|---|
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
CNC, 3D Printer, Stepper Motors, Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & Modules
Cnc Shield For Arduino V3 Engraver
CNC, 3D Printer, Stepper Motors, Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & ModulesCnc Shield For Arduino V3 Engraver
- This expansion board as a driver expansion board, can be used for engraving machines, 3D printers.
- It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.
- UNO for Arduino module IO port correspondence introduction.
- IO corresponding figure above
- UNO for Arduino———————- expansion board
- 8 ———————— EN ( stepper motor driver enable , active low )
- 7 ———————– Z.DIR (Z -axis direction control )
- 6 ———————– Y.DIR (Y -axis direction control )
- 5 ———————– X.DIR (X -axis direction control )
- 4 ———————- Z.STEP (Z -axis stepper control )
- 3 ———————- Y.STEP (Y -axis stepper control )
- 2 ———————- X.STEP (X -axis stepper control )
SKU: n/a -
Miscelleneous, Pumps, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & Modules
Mini Submersible Water Pump
Miscelleneous, Pumps, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & ModulesMini Submersible Water Pump
Product details of Mini Submersible Water Pump
- Diy Product
- 6-12V Dc
- Suitable For School Projects
- Plastic Body
Mini Sybmersible water pump
Brand new
Good quality product
SKU: n/a -
Sensors, Breakout Boards, Shields & Modules, Temperature Sensors/Modules, Tools, DIY & Hardware
TEC Peltier Cell TEC12706 with Aluminum Water Cooling Block Water Block TEC 12706 40*120*12mm
Sensors, Breakout Boards, Shields & Modules, Temperature Sensors/Modules, Tools, DIY & HardwareTEC Peltier Cell TEC12706 with Aluminum Water Cooling Block Water Block TEC 12706 40*120*12mm
- -Internal flow channel extrusion forming
- -Brazing parts into a whole
- -Leak rate of less than 5X10-6 mbar.l/s parts
- -Internal fin thickness 0.5MM
- -Processing: vacuum aluminum brazing
- -Surface treatment: silver oxidation
- -Applicable to computer CPU water, industrial inverter driver, laser head cooling, industrial control cabinet cooling
- -Size:120 (Depth) x 40 (Width) x 12 (High) MM
- -Weight:65g
- Model: TEC1-12706.
- Size: 40mm x 40mm x 3.6mm.
- Working current: 4.3-4.6 A (rated 12 v); Imax: 6A.
- Rated voltage: DC12V (Vmax: 15 v starting current 5.8 A).
- Operates Temperature: -30? to 70 degree
SKU: n/a
There are no reviews yet.