Accelrometer, Gyro, Compass, Gyros, Compass, GPS, RC, Drones, Multirotors, Sensors, Breakout Boards, Shields & Modules
GY-273 HMC5883L Triple-axis Magnetometer HMC5883 Module Arduino
Availability:
20 in stock
- Name: the HMC5883L modules (three-axis magnetic field module)
- Model: GY-273
- Using the chip: HMC5883L
- Power supply :DC3-5V
- Means of communication: IIC communication protocol
- Measuring range: ? 1.3-8 Gaussian
- Size: 13.9 * 18.5
₨415.00
20 in stock
Product details of GY-273 HMC5883L Triple-axis Magnetometer HMC5883 Module Arduino
- Name: the HMC5883L modules (three-axis magnetic field module)
- Model: GY-273
- Using the chip: HMC5883L
- Power supply :DC3-5V
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Lipo Batteries, Chargers, Connecters, RC, Drones, Multirotors
VANT Original Lipo Battery 3S 11.1V 900mAh 30C with XT-60 Plug
Lipo Batteries, Chargers, Connecters, RC, Drones, MultirotorsVANT Original Lipo Battery 3S 11.1V 900mAh 30C with XT-60 Plug
- True Capacity and C-Rating
- Thick 12AWG Discharge Leads
- XT-60 Plug Style Connector
- JST-XH Balance connector
- Capacity: 900mAh
- Voltage: 3S/ 3 Cell/ 11.1V
- Discharge Rate: 30C Constant / 60C Burst (10 sec)
- Charge Rate:2C (10.2A) Max
- Weight: 72g (including wire, plug)
- Dimensions LxWxH: 66.6×25.2×20.3mm
- Discharge Plug: XT-60Plug Style Connector
- Balance Plug: JST-XH
SKU: n/a -
Frames, RC, Drones, Multirotors
S500 Quadcopter Frame With Landing Gear
- S500 ?500mm Upgrade F450 Quadcopter Frame Kit w/Landing Gear MINI S800 EVO Design
- Learned arm design from DJI S800 EVO, and enhanced
- Specifications:- Wheelbase: 500mm- Weight: 405g/580g(without/with gimbal)- Motor suggest: 2212 KV980; 2216 KV880 KV900; 3108 900KV (not include)
SKU: n/a -
Lipo Batteries, Chargers, Connecters, RC, Drones, Multirotors
VANT Lipo Battery 3S 11.1V 1800mAh 30C with XT-60 Plug
Lipo Batteries, Chargers, Connecters, RC, Drones, MultirotorsVANT Lipo Battery 3S 11.1V 1800mAh 30C with XT-60 Plug
Features:
- True Capacity and C-Rating
- Thick 12AWG Discharge Leads
- XT-60 Plug Style Connector
- JST-XH Balance connector
- Capacity: 1800mAh
- Voltage: 3S/ 3 Cell/ 11.1V
- Weight: 139g (including wire, plug)
- Dimensions LxWxH: 101×33.6×19 mm
- Discharge Plug: XT-60Plug Style Connector
- Balance Plug: JST-XH
SKU: n/a -
CNC, 3D Printer, Stepper Motors, Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & Modules
Cnc Shield For Arduino V3 Engraver
CNC, 3D Printer, Stepper Motors, Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & ModulesCnc Shield For Arduino V3 Engraver
- This expansion board as a driver expansion board, can be used for engraving machines, 3D printers.
- It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.
- UNO for Arduino module IO port correspondence introduction.
- IO corresponding figure above
- UNO for Arduino———————- expansion board
- 8 ———————— EN ( stepper motor driver enable , active low )
- 7 ———————– Z.DIR (Z -axis direction control )
- 6 ———————– Y.DIR (Y -axis direction control )
- 5 ———————– X.DIR (X -axis direction control )
- 4 ———————- Z.STEP (Z -axis stepper control )
- 3 ———————- Y.STEP (Y -axis stepper control )
- 2 ———————- X.STEP (X -axis stepper control )
SKU: n/a
There are no reviews yet.