Product details of Digital Thermostat W1209 with Acrylic Case for Incubator Temperature Controller
- Temperature range :-50-110 ?
- Temperature control mode:ON / OFF
- Control accuracy:0.1 ?
- Hysteresis accuracy:0.1?
- Refresh rate:0.5S
- High temperature protection?0-110?
- Supply voltage:DC 12V
- Static current:? 35MA, attract current ? 65MA
- Output voltage:DC 12V
- Output power:20A relay
- Measurement input:NTC (10K 0.5%) Waterproof Sensor
- Environmental requirements: -10 ~ 60 ? ?Humidity 20% -85%
- Resolution?When temperature is 0.1?, the resolution is -9.9~99.9, other temperature segment is 1?
- How to use:
- Connect the power supply and the load, you can supply to the controller.
- It displayed as a measured temperature.
- Press the SET button, the display flashes the temperature;
- Press ? to set the desired temperature;
- After setting press SET to confirm return;
- The controller automatically performs the relay by setting off!
- Lights, LED status descriptions:
- Indicator:Off The relay is switched off, Always indicate the relay is closed.
- LED:Shows LL is the sensor open, showing HH is out of range, the thermostat will be forced to close the relay, the display ? as high temperature protection.
- Buttons:
- P0 :Cooling / Heating; Range: C/H; Default: C
- P1 :Hysteresis Setting; Range:0.1-15; Default: 2
- P2 :Highest Setting Limit; Range:110; Default: 110
- P3: Lowest setting Limit; Range:-50; Default: -50
- P4 :Temperature Correction; Range:-7-7?c; Default: 0?c
- P5: Start Time; Range:0-10 Minute; Default: 0
There are no reviews yet.