, ,

Digital Thermostat Switch W1209 for Incubators Temperature Controller

Availability:

15 in stock


  • DONT GO FOR LOW QUALITY same appearnace options available
  • We have High Quality with Bigger Sensor and Sensor Wire, see the Pictures for Reference
  • Check Video for Setting Porcess
  • Temperature range :-50-110 ?
  • Temperature control mode: ON / OFF
  • Control accuracy: 0.1 ?
  • Refresh rate: 0.5S
  • High temperature protection? 0-110?
  • Supply voltage: DC 12V
  • Static current: ? 35MA, attract current ? 65MA

425.00

15 in stock

Product details of Digital Thermostat Switch W1209 for Incubators Temperature Controller

  • Temperature range :-50-110 ?
  • Temperature control mode:ON / OFF
  • Control accuracy:0.1 ?
  • Hysteresis accuracy:0.1?
  • Refresh rate:0.5S
  • High temperature protection?0-110?
  • Supply voltage:DC 12V
  • Static current:? 35MA, attract current ? 65MA
  • Output voltage:DC 12V
  • Output power:20A relay
  • Measurement input:NTC (10K 0.5%) Waterproof Sensor
  • Environmental requirements: -10 ~ 60 ? ?Humidity 20% -85%
  • Resolution?When temperature is 0.1?, the resolution is -9.9~99.9, other temperature segment is 1?
  • How to use:
  • Connect the power supply and the load, you can supply to the controller.
  • It displayed as a measured temperature.
  • Press the SET button, the display flashes the temperature;
  • Press ? to set the desired temperature;
  • After setting press SET to confirm return;
  • The controller automatically performs the relay by setting off!
  • Lights, LED status descriptions:
  • Indicator:Off The relay is switched off, Always indicate the relay is closed.
  • LED:Shows LL is the sensor open, showing HH is out of range, the thermostat will be forced to close the relay, the display ? as high temperature protection.
  • Buttons:
  • P0 :Cooling / Heating; Range: C/H; Default: C
  • P1 :Hysteresis Setting; Range:0.1-15; Default: 2
  • P2 :Highest Setting Limit; Range:110; Default: 110
  • P3: Lowest setting Limit; Range:-50; Default: -50
  • P4 :Temperature Correction; Range:-7-7?c; Default: 0?c
  • P5: Start Time; Range:0-10 Minute; Default: 0
  • P6: High temperature alarm; Range:0-110; Default: Off
  • When the Thermostat is power off, long press ?- or +?, you can restore the factory settings.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.