Robotics, Motors, CNC, 3D Printer, Pumps
Showing all 16 results
-
Robotics, Car Chassis, Motors, Wheels, Robotics, Motors, CNC, 3D Printer, Robotics, Motors, CNC, 3D Printer, Pumps
2Wheel Robot Car Chassis Tracking Equipment / Speed Encoder Wheel Gear Motor For Arduino
Robotics, Car Chassis, Motors, Wheels, Robotics, Motors, CNC, 3D Printer, Robotics, Motors, CNC, 3D Printer, Pumps2Wheel Robot Car Chassis Tracking Equipment / Speed Encoder Wheel Gear Motor For Arduino
16 pcs Intelligent Robot Car Chassis Tracking EquipmentSpeed Encoder Wheel Gear Motor with free wheel For ArduinoSKU: n/a -
Robotics, Car Chassis, Motors, Wheels, Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & Modules
Arduino L298N Motor Drive Dual H Bridge Driver L298 Module
Robotics, Car Chassis, Motors, Wheels, Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & ModulesArduino L298N Motor Drive Dual H Bridge Driver L298 Module
- Work mode: H bridge drive (double road)
- Main control chip: L298N
- Logical voltage: 5V
- Drive voltage: 5v-35v
- Logical current: 0mA – 36mA
- Driving current: 2A (MAX single bridge)
SKU: n/a -
CNC, 3D Printer, Stepper Motors, Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & Modules
Cnc Shield For Arduino V3 Engraver
CNC, 3D Printer, Stepper Motors, Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & ModulesCnc Shield For Arduino V3 Engraver
- This expansion board as a driver expansion board, can be used for engraving machines, 3D printers.
- It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.
- UNO for Arduino module IO port correspondence introduction.
- IO corresponding figure above
- UNO for Arduino———————- expansion board
- 8 ———————— EN ( stepper motor driver enable , active low )
- 7 ———————– Z.DIR (Z -axis direction control )
- 6 ———————– Y.DIR (Y -axis direction control )
- 5 ———————– X.DIR (X -axis direction control )
- 4 ———————- Z.STEP (Z -axis stepper control )
- 3 ———————- Y.STEP (Y -axis stepper control )
- 2 ———————- X.STEP (X -axis stepper control )
SKU: n/a -
Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & Modules, Servo Motors
Digital Servo DORCRCMAN DOMAN RC DM-S0306D 38g/0.13s/3kg.cm 360 degree continuous rotation 3kg Servo Motor
Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & Modules, Servo MotorsDigital Servo DORCRCMAN DOMAN RC DM-S0306D 38g/0.13s/3kg.cm 360 degree continuous rotation 3kg Servo Motor
- standard size digital servo with POM gears 25T servo,2BB
- Torque motor,12bit Digital
- Operating Voltage: 4.8V to 6V
- Interface: (JR)
- Wire length: 30cm
SKU: n/a -
Robotics, Car Chassis, Motors, Wheels, Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & Modules
DIY D2-5 Intelligent Tracing Car Kit 2WD Car Chassis Kit?without battery)
Robotics, Car Chassis, Motors, Wheels, Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & ModulesDIY D2-5 Intelligent Tracing Car Kit 2WD Car Chassis Kit?without battery)
- 1. Line tracking smart car DIY kits of electromechanical assembly parts.
- 2.Light weight and portable to carry.
- 3.Easy to install can be used for a long time.
- 4.It can automatically track black feet and automatically identify directions.
- Description:
- The whole process is a closed loop control so it can be controlled quickly and wisely.
- Specification:
- Model: D2-5
SKU: n/a -
CNC, 3D Printer, Stepper Motors, RC, Drones, Multirotors, Robotics, Motors, CNC, 3D Printer, Pumps, Servo Motors
ESC Tester Servo Tester Pack of 3
CNC, 3D Printer, Stepper Motors, RC, Drones, Multirotors, Robotics, Motors, CNC, 3D Printer, Pumps, Servo MotorsESC Tester Servo Tester Pack of 3
- Voltage consumption: DC4.8-6V
- Size: 48 x 42 x 17mm
- Original box: NO
- Color: Blue
- Item size: 48*42*17 mm
- Net weight: 7g
- Package weight: 13g
- ? Packet content:
- 1 x ESC/Servo tester
SKU: n/a -
Robotics, Car Chassis, Motors, Wheels, Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & Modules
Flex Sensor 2.2 Inch For Robotic Hand
Robotics, Car Chassis, Motors, Wheels, Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & ModulesFlex Sensor 2.2 Inch For Robotic Hand
- Features?
- Angle Displacement Measurement
- Bends and Flexes physically with motion device
- Possible Uses
- Simple Construction
- Low Profile
- Physical Therapy
- Musical Instruments
- Computer Peripherals
- Medical Devices
- Gaming (Virtual Motion)
- Robotics
SKU: n/a -
CNC, 3D Printer, Stepper Motors, Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & Modules
L293D Motor Driver Module Controller for Arduino Robotics
CNC, 3D Printer, Stepper Motors, Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & ModulesL293D Motor Driver Module Controller for Arduino Robotics
- L293D MOTOR DRIVER SHIELD
- Type:Drive IC
- Condition:New
- Application:Computer
- Supply Voltage:5V
- Model Number:Motor Drive Shield
- is_customized:Yes
SKU: n/a -
Miscelleneous, Pumps, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & Modules
Mini Aquarium Water Pump
Miscelleneous, Pumps, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & ModulesMini Aquarium Water Pump
- Pump Size: 90 mm x40 mmx35 mm
- Outlet diameter: diameter 6 mm, an outer diameter of 8.5 mm
- Working voltage: DC12V, Current :0.5-0 .7 A (6W power must reach above)
- Flow :1.5-2L / Min (left), the maximum suction lift: 2 m
- Head: up to 3 m vertical
- Life: up to 2500H, the water temperature: up to 80
SKU: n/a -
Miscelleneous, Pumps, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & Modules
Mini Submersible Water Pump
Miscelleneous, Pumps, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & ModulesMini Submersible Water Pump
Product details of Mini Submersible Water Pump
- Diy Product
- 6-12V Dc
- Suitable For School Projects
- Plastic Body
Mini Sybmersible water pump
Brand new
Good quality product
SKU: n/a -
Gear Motors, Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & Modules
N20 DC 6V 1000 RPM Mini Metal Gear Motor with 3mm Shaft Diameter
Gear Motors, Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & ModulesN20 DC 6V 1000 RPM Mini Metal Gear Motor with 3mm Shaft Diameter
- Certification:ROHS
- Commutation:Brush
- Usage:Car,Electric Bicycle
- Type:Gear Motor
- Model Number:N20 DC MOTOR
- Protect Feature:Drip-proof
- Efficiency:IE 2
- Speed(RPM):10~2000RPM
- Voltage(V):6-12V
SKU: n/a -
Dvelopment Boards and Kits, Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Robotics, Motors, CNC, 3D Printer, Pumps, Servo Motors
Original Tower Pro SG90 Analogue Servo Motor
Dvelopment Boards and Kits, Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Robotics, Motors, CNC, 3D Printer, Pumps, Servo MotorsOriginal Tower Pro SG90 Analogue Servo Motor
KINDLY NOTE ITS ORIGINAL TOWER PRO, WITH SAME NAME CLONE IS SELLING IN MARKET AT LOW PRICE. WE HAVE THAT TOO IN STOCK IF YOU WANT CHEAPER OPTION LOOK FOR THAT ONE ON OUR WEBSITE. CAN SEE PICTURES FOR REFERENCE.
SKU: n/a -
CNC, 3D Printer, Stepper Motors, Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & Modules
Stepper Motor 28Byj-48 5V + Uln2003 Motor Driver Board
CNC, 3D Printer, Stepper Motors, Robotics, Motor Driver, IR, Robotics, Motors, CNC, 3D Printer, Pumps, Sensors, Breakout Boards, Shields & ModulesStepper Motor 28Byj-48 5V + Uln2003 Motor Driver Board
- Rated Voltage: DC5V 4-phase
- Step angle: 5.625 x 1/64
- DC Resistance: 200??7% (25C)
- Insulation Resistance: >10M? (500V)
- Dielectric Strength: 600V AC / 1mA / 1s
- Insulation Grade: A
- No-load Pull in Frequency: >600Hz
- No-load Pull out Frequency: >1000Hz
- Pull in Torque: >34.3mN.m(120Hz)
- Detent Torque: >34.3mN.m
- Temperature Rise:
SKU: n/a
